what do i use to connect a router table and a sander to a wet vac.

All-time Methods for Dust Control in a Workshop

The top fittings, filters, methods and other accessories for turning your vacuum into a dust collector in your workshop.

Every editorial production is independently selected, though we may be compensated or receive an affiliate commission if you lot buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.

1 / 9

Getting Rid of Sawdust

Y'all don't take to put up with that irritating layer of sawdust that seems to settle throughout the shop, garage or basement every fourth dimension yous cut and sand a few lengths of trim. Nor exercise you have to shell out the large bucks for a central dust collection organisation.

You tin capture well-nigh nuisance grit with a standard shop vacuum and a few accessories. We'll show you lot how to assemble simple, cheap grit collectors that'll suck upward most of that sawdust before it gets all over everything.

Read this story to learn how to keep things from getting as well dusty on the jobsite.

2 / 9

Get Universal Adapters for Transitions

If yous're lucky, you can plug the vacuum hose straight into the grit port of your tool. But that won't happen oftentimes, because the size of dust ports on ability hand tools varies.

The best strategy for putting together a dust collector system is to buy a universal adapter. You simply cutting the soft prophylactic with a utility knife so that it fits the grit port on the tool and the vacuum hose for a woodworking dust collection arrangement. (We recommend i-ane/4 inch hose for most hand ability tools.) However, keep duct tape handy for completely sealing odd-size dust ports.

3 / nine

A Smaller 1-one/4 Inch Hose Is Bang-up for Flexibility

Buy a 6-human foot (or longer) length of ane-1/4 inch hose to connect directly to hand power tools. Then connect the ane-one/4 inch hose to the standard two-one/2 inch vacuum hose with a plastic friction fit coupling. The smaller hose is calorie-free and flexible compared with the larger hose. No drag, no kinks. You'll barely observe the 1-one/4 inch hose as y'all move the saw, sander or other tool across the work piece. Nearly sanders have dust ports, but relatively few circular saws and routers have dust drove systems.

4 / 9

Purchase Bench-Top Tools With Grit Ports Whenever Possible

These days, about bench-acme saws and planers have dust ports, and they make a huge departure in controlling grit, even with a shop vacuum. Y'all won't get information technology all, just even an 80 percent reduction will help a lot.

The connections are usually easy. In most cases, the ports are a standard ii-1/2 inch, then you lot can merely push button the 2-1/2 inch vacuum hose correct into the port as we testify here. This works all-time with larger chapters vacuums, because the sawdust and chips from a table saw or planer build up fast!

5 / 9

Adhere a Permanent Fitting

Ideally, tool manufacturers would standardize dust ports and so you could swiftly motility your hose from i tool to some other. But that's non withal the case. In the concurrently, save time and frustration past installing an adapter permanently on heavily used tools, such as miter saws. And then you lot can but plug in the hose.

6 / 9

Use Remote Controls

College-priced shop vacuums oftentimes come with a special switch that turns on the vacuum automatically when the tool starts up. (Fein is one brand.) This is a great characteristic, because yous don't take to walk over to the shop vacuum to plow it on every time y'all want to make a cut.

However, you lot can also solve this trouble in three other ways:

1. Use a pedal switch to plow on your vacuum.
2. Purchase a remote switch and turn the vacuum on from anywhere in the room
3.  Plug your tool and vacuum into a special ability box that activates the vacuum when the tool is turned on.

7 / 9

Upgrade to a Improve Filter

You may accept noticed the cloud of fine dust that blows out the exhaust when yous plow on about shop vacuums. Modest dust particles flow right through standard store vacuum dust filters. To stop this fine grit, buy a loftier-quality HEPA filter from any shop that sells your vacuum brand. They are well worth the toll because they last a long time and can be rinsed clean.

8 / 9

Reduce Hose Ataxia

Dust collection hoses add to the clutter in a small store. But if you tend to work in one expanse, you can eliminate some of the tangle and keep the tool from getting hung up by loosely hanging the vacuum hose from an overhead hook. If you want to go all out, add several in the areas you work in near often.

9 / 9

Use a Portable Grit Hood

Many power tools don't accept grit ports. But if yous're doing a lot of cutting and drilling, y'all can easily position a portable grit collector nearby. Depending on the organisation, yous may take to fiddle with adapters and metal duct (from home centers) to make the transition to the vacuum hose. You can besides comb through the HVAC aisle at your local abode center and put together a less expensive system with stock parts and duct tape.

Originally Published: December 04, 2020

mcauleyanardeakin.blogspot.com

Source: https://www.familyhandyman.com/list/using-a-shop-vacuum-for-dust-collection/